Ruger Blackhawk | |
---|---|
A .357 Magnum/9mm convertibleRuger Blackhawk in blued finish, with Adjustable Sights, and a 4 5/8' Barrel | |
Type | Revolver |
Place of origin | United States |
Production history | |
Manufacturer | Sturm, Ruger |
Produced | 1955–Present |
Specifications | |
Mass | 36–48 oz (1,021–1,361 g) |
Length | 10 1/4–13 1/2 inches (260–343 mm) |
Barrel length | 4 5/8–7 1/2 inches (117–191 mm) |
Cartridge | Varies, see Calibers |
Action | Single-action revolver |
Feed system | 6-round cylinder |
- Ruger Blackhawk 357 Serial Numbers By Year 15
- Ruger Super Blackhawk 44 Mag Serial Numb…
- Ruger Blackhawk Serial Number Dates
- Ruger Blackhawk 357 Serial Numbers By Year Chart
Ruger does not necessarily produce firearms in serial number order. There are occasions when blocks of serial numbers have been manufactured out of sequence, sometimes years later. Also, within a model family the same serial number prefix may be used to produce a variety of different models, all in the same block of serial numbers. Blackhawk Serial Numbers rollmarked with.357 Cal. Blackhawk Revolvers beginning in 2013. The above chart shows the approximate first serial number shipped for the indicated year. This number should be used as a point of reference only. Super 20683, shipped April 1966 with larger 3/32 serial numbers and Blackhawk Flattop barrel. Ruger blackhawk serial numbers, ruger blackhawk serial numbers year produced, ruger new model blackhawk 357 serial numbers. Ruger caliber and serial number look-up. Www.Go2GBO.com Happy New year to you and yours. I have a Super Blackhawk serial 81-28xxx. Jan 04, 2014 New (to me) Blackhawk in.357. Mystery serial number. ( Ruger New Model Blackhawk Serial Number History) They state that the old model was made until 1973 and the final year's serial numbers began with 31-41551. The new model serial numbers began in 1974 with 32-33639. Mine is a new model but its serial number is significantly earlier than.
The Ruger Blackhawk is a 6-shot, single-actionrevolver manufactured by Ruger. It is produced in a variety of finishes, calibers, and barrel lengths.
- 2Various models
History[edit]
In the early 1950s, Westerns were popular in movies and television. Colt had discontinued the iconic Single Action Army prior to World War II, and few single-action revolvers were available to meet market demand for cowboy-style revolvers. In 1953, the new firm of Sturm, Ruger & Company introduced the Single-Six, a .22 LRrimfire single-action revolver. The Single-Six proved to be a popular seller, leading Ruger to develop and market a centerfire revolver similar to the Single Action Army: the Ruger Blackhawk.[1][2]
Ruger introduced the Blackhawk in 1955. Chambered for the .357 Magnum, the Blackhawk was a simple and strong design, and it sold well. In 1956, as Smith & Wesson was introducing the new .44 Magnum, Ruger quickly developed a variant of the Blackhawk in the new cartridge. Ruger achieved wide popularity with this firearm in a hotly anticipated new cartridge, which was both cheaper and more readily available than the Smith & Wesson Model 29 revolver. According to popular legend, Ruger was able to field a .44 Magnum revolver at nearly the same time as Smith & Wesson due to a Ruger employee finding expended .44 Magnum cartridge cases at a scrapyard and deducing that Smith & Wesson was about to launch a new cartridge.[3][4]
The 1955–1962 Blackhawks are known today as the 'Flattop' models, because their adjustable rear sights were not protected by 'ears' extending up from the frame as later became standard. Start up screen. From 1962 through 1972, Ruger made the 'Three Screw' Blackhawk in various calibers, so called by the number of screws visible on the side of the revolver.
The Flattop and Three Screw Rugers were modernized compared to the Colt Single Action Army, in that they had adjustable sights instead of the Colt's fixed sights, and they used wire coil springs instead of the Colt's flat leaf springs. Bill Ruger chose coil springs due to their greater durability, saying that it solved one of the primary weaknesses of the Colt design.
The early models of the Blackhawk still operated the same way as the Colt, in that the hammer was half-cocked to load and unload and that the firearm was not safe to carry with all six chambers loaded due to the hammer resting upon the sixth chamber.[5] In 1973, in order to eliminate accidents occurring from the hammer jarring against a round loaded in the sixth chamber, Ruger introduced the New Model Blackhawk. The New Model Blackhawk did not require the hammer to be half-cocked for loading and unloading, and it employed a transfer bar mechanism which prevented the cartridge under the hammer from being fired without the trigger being pulled. The New Blackhawk was seen as limiting firearms accidents and legal liability. Ruger then began offering a retrofit program, offering free transfer bar conversions to earlier variants of the Blackhawk.
It is worth noting that the Super Blackhawk is capable of operating with much higher pressure handloads than factory produced ammunition in .44 Magnum. Factory produced loads, such as Federal Champion 240 gr JSP loads are right around 800 ft-lbs muzzle energy. Loads in excess of 1200 ft-lbs muzzle energy are commonly produced by handloaders for this caliber and the Super Blackhawk can, in fact, handle more powerful loads than any .44 Magnum lever action rifle and substantially more powerful rounds than any double action .44 Magnum revolver. Buffalo Bore makes a heavy load that is in excess of 1500 ft-lbs muzzle energy.[6]
These facts make the Ruger Super Blackhawk one of the top choices for handgun hunting. It is capable of reliably taking down deer, elk, caribou, moose, lion, grizzly or brown bear and even cape buffalo.[7] It is commonly used to deliver a coup de grace shot to mortally wounded large game, having the ability to dispatch even an elephant with a conscientiously placed point blank shot to the head. The wide availability of .44 Magnum cases and bullets make the .44 Magnum chambering far more practical than .454 Casull or .480 Ruger, while allowing for similar ballistics in custom loadings.[8]
The Ruger Super Blackhawk in .44 Magnum is one of the most accurate big bore pistols for target shooting, typically returning 5 shot groups that are one ragged hole from a rest at 25 yards. Work is commonly performed on the action of these revolvers to give a light, crisp trigger pull, thereby contributing to accuracy.[9]
Various models[edit]
Ruger Old Model Super Blackhawk
Ruger New Model Super Blackhawk and Javalina
The Ruger Old Army is a 45-caliber percussion revolver based on the Ruger Blackhawk action.
The Blackhawk is a popular base gun for custom work. This one is a cooperative effort by members of the American Pistolsmith's Guild
Variation of Ruger Blackhawk of all-steel construction and a number of retro features including .357-size frame and steel micro sight. There is a Bisley Grip Variation and a selection of calibers-.44 Special pictured.
Over the years the Blackhawk has appeared in a wide variety of models. These models include:
- New Model Blackhawk: Produced in blued steel in .30 Carbine, .357 Magnum, .41 Remington Magnum, .44 Special, and .45 Colt; produced in stainless in .327 Federal Magnum with an 8-round cylinder, .357 Magnum, and .45 Colt. Multiple barrel lengths were offered in many of these configurations.
- New Model Blackhawk Convertible: The cylinder of a Blackhawk is easily removed, and can be replaced with a cylinder for a different cartridge of the same diameter. Ruger has offered 'convertible' cylinder revolvers in .45 ACP/.45 Colt, .38-40/10mm Auto, and .357 Magnum/9×19mm Parabellum. Other than being sold with multiple cylinders, these firearms are identical to the Blackhawk.
- New Model Super Blackhawk: Produced in blued and stainless, with or without a rib for mounting a scope. The Super Blackhawk is built on the same frame, but with a larger grip (in the 7.5' and 10.5' barrels) and unfluted cylinder (except for 5.5' barrel), in order to more effectively deal with the .44 Magnum's recoil. Also, the grip frames are made of steel, versus aluminium for those same components in the Blackhawk. Ejector rod housings were originally steel on old model Super Blackhawks. The new model stainless steel versions have steel ejector rod housings.
- Vaquero and New Vaquero: With the popularity of Cowboy Action Shooting came demand for a single-action revolver that was more traditional in appearance. As the standard Ruger Blackhawk departs from the Single Action Army looks due to its adjustable sights, Ruger offered a fixed-sight equivalent to cater to buyers wanting a more traditional appearance. In all other ways, the Vaquero was identical to the Blackhawk, though offered in slightly fewer variants. The original Vaquero was offered in .357 Magnum, .44 Magnum, and .45 Colt. After some time, Ruger went with a smaller frame to more closely resemble the actual size of the Colt SAA, changed the name to the New Vaquero, and dropped the powerful .44 Magnum from the lineup. While keeping the smaller size, Ruger later went back to the simple Vaquero name.
- Bisley: The Bisley grip is a type of angled grip developed by Colt for target shooting at the end of the 19th Century. Ruger's 'Bisley' offerings incorporated a Bisley-style grip, hammer spur, and trigger. A limited edition of 1,000 Units from TALO Distributions featuring Turnbull Restorations Case Hardened frame.
- Old Army: The Old Army is a percussion ('cap and ball') black powder revolver based on the Blackhawk frame.
Calibers[edit]
- .32 H&R Magnum/.32-20 Winchester Convertible (Single distributor—discontinued)
- 9×19mm Parabellum/.357 Magnum Convertible
- .357 Remington Maximum (Discontinued)
- 10mm Auto/.38-40 Winchester Convertible (Single distributor—discontinued)
- .44 Magnum (Super Blackhawk only)
- .44 Magnum/.44-40 Winchester Convertible (Single distributor—discontinued)
- .45 ACP/.45 Colt Convertible
- .454 Casull (Super Blackhawk Distributor Exclusive)
- .480 Ruger (Super Blackhawk Distributor Exclusive)
Finishes[edit]
Ruger Blackhawk 357 Serial Numbers By Year 15
See also[edit]
References[edit]
- ^Taffin, John (2005). Single Action Sixguns. Krause Publications. p. 336. ISBN978-0-87349-953-8.
- ^Taffin, John (1997). Big Bore Sixguns. Krause Publications. p. 336. ISBN978-0-87341-502-6.
- ^Sturm Ruger booklet 'Fifty Years of .44 Magnums'
- ^Sixguns.com
- ^Larson, Erik (24 June 1993). 'Wild West Legacy: Ruger Gun Often Fires If Dropped, but Firm Sees No Need for Recall'. The Wall Street Journal. Retrieved 16 October 2015 – via Proquest.
- ^'Heavy .44 Magnum +P+ Pistol & Handgun Ammunition'. Buffalo Bore Ammunition | Strictly Big Bore - Strictly Business. Retrieved 15 October 2017.
- ^'Handguns for Dangerous Game'. Shooting Times. 15 February 2011. Retrieved 15 October 2017.
- ^'44 Magnum Load Data - Handloads.Com'. www.handloads.com. Retrieved 15 October 2017.
- ^DIYautotech (22 November 2012), Ruger Single Action Trigger Job Ruger Single Six, Single Ten, Blackhawk, Vaqeuro, retrieved 15 October 2017
External links[edit]
Retrieved from 'https://en.wikipedia.org/w/index.php?title=Ruger_Blackhawk&oldid=902769867'
Ruger Single-Six | |
---|---|
Type | Single action |
Place of origin | United States |
Production history | |
Designer | Sturm, Ruger |
Designed | 1953 |
Manufacturer | Sturm, Ruger |
Unit cost | $534[1]-754[2] (MSRP) |
Produced | 1953 - present |
Specifications | |
Mass | 32-40 oz[3] |
Length | 10¼ - 15 inches[3] |
Barrel length | 4⅝, 5½, 6½, 7½, 9½ inches |
Cartridge | .22 LR, .22 WMR, .17 HMR,[4].32 H&R Magnum |
Barrels | 6-groove[3] |
Action | |
Feed system | 6-round cylinder[3] |
Sights | Fixed or adjustable iron sights[3] (the Hunter model has provisions for mounting a scope)[4] |
The Ruger Single-Six is a single action rimfirerevolver produced by Sturm, Ruger. The Single-Six was first released in June 1953.[5]
The Single-Six is currently produced as the New Model Single-Six. The term 'New Model' simply means that this model includes Ruger's transfer bar mechanism for increased safety, allowing one to carry the revolver safely with all 6 chambers loaded. Prior to 1973, the Single-Six was produced without the transfer bar mechanism, making it less safe to carry with all six chambers loaded, and with the hammer resting on a loaded chamber. The transfer bar safety allows the revolver to fire only when the trigger has been pulled. Ruger provides the transfer bar safety upgrade free of charge for owners of any old model Single-Six.[6]
![Ruger Blackhawk 357 Serial Numbers By Year Ruger Blackhawk 357 Serial Numbers By Year](/uploads/1/3/3/9/133907941/883592904.jpg)
- 1Specifications
Specifications[edit]
Ruger Super Blackhawk 44 Mag Serial Numb…
Custom Long Barrel 45 Colt/45 ACP Blackhawk over Standard Ruger Single-Six 9.5 inch barrel
The New Model Single-Six is currently chambered in .22 LR, .22 WMR (.22 Magnum), and .17 HMR (initially offered with a second cylinder in .17 HM2[7]). Barrel lengths include 4⅝, 5½, 6½, 7½, and 9½ inches, available in both blued and stainless steel.
![Ruger blackhawk 357 serial numbers by year manufactured Ruger blackhawk 357 serial numbers by year manufactured](/uploads/1/3/3/9/133907941/996724310.jpg)
Ruger manufactures several 'convertible' models that ship with both a .22 LR cylinder and .22 WMR cylinder, allowing the use of both cartridges.[3] The .22 Short and .22 Long cartridges can also be fired in the Long Rifle cylinder. For those models that ship with both cylinders, the last 3 digits of the serial number are engraved on the front of the cylinder; only cylinders that have been properly timed should be used with any given revolver. The term Super Single-Six refers to those models which have fully adjustable target sights.
Ruger Blackhawk Serial Number Dates
In 2011 Ruger introduced the Single-Ten and in 2012 they introduced the Single-Nine. Both of these revolvers are stainless steel variants of the Single-Six design with fiber optic sights. The Single-Ten is chambered in .22 Long Rifle, with ten chambers and a 5.5 inch barrel, whereas the Single-Nine is chambered in .22 Winchester Magnum Rimfire (.22 WMR), with nine chambers and a barrel length of 6.5 inches. Sony vaio cd burner software.
.32 centerfire models[edit]
From 1984 to 1997 Ruger chambered the New Model Single-Six in .32 H&R Magnum (which allows the use of .32 S&W and .32 S&W Long cartridges). Ruger reintroduced this caliber option in 2002,[8] and in September 2014 released the Single-Seven in .327 Federal Magnum as well, in a seven-shot stainless steel variant, with barrel lengths of 4.63, 5.5, and 7.5 inches.[9][10]
See also[edit]
References[edit]
- ^'Standard Blued model product page'. Archived from the original on 2009-11-15.
- ^'Hunter model product page'. Archived from the original on 2009-11-20. Retrieved 2010-06-30.
- ^ abcdef'Convertible model product page'.
- ^ ab'Main product page'. Archived from the original on 2010-06-18. Retrieved 2010-06-30.
- ^'Ruger's Old Model Single-Sixes' by Bill Hamm
- ^Ruger safety upgrade offer (PDF)
- ^http://www.ruger.com/news/2004-11-11a.html
- ^'Return of the Ruger New Model Single-Six in .32 H&R Magnum' by Sturm, Ruger & Co., Inc.
- ^'Ruger® Single-Six® Family Distributor Exclusives Models'.
- ^'Ruger's Red-Hot, Versatile Single Seven .327 Federal Magnum - Gun Digest'. Gun Digest.
External links[edit]
- Ruger New Model Single-Six at Ruger.com
- Mike Cumpston 'The .22 Magnum As A Revolver Cartridge'. American Handgunner. Sept 2001. FindArticles.com. 24 Mar. 2008.
Ruger Blackhawk 357 Serial Numbers By Year Chart
Retrieved from 'https://en.wikipedia.org/w/index.php?title=Ruger_Single-Six&oldid=917907786'